Data acquisition unit eDAS

eDAS 8 CH datalogger What does he do

Automatic monitoring for the detection and storage of data from analog electrical transducers operating in various application areas such as: crack meters, inclinometers, temperature sensors, wire displacement meters, load cells, level and pressure transducers, etc.

Ponits of Strength
  • Small size
  • Low power
  • Ease of installation and use
  • Expandability: Multi-channel and / or Multi-control unit (timely and / or distributed monitoring)
  • Integrated Diagnostics
  • Sending SMS alarms

Ideal as a small and autonomous acquisition system for short / medium / long term monitoring.

Description

This instrumentation, programmable and of wide versatility, with battery operation, is typically indicated in structural monitoring, with particular reference to the measurement of the evolutionary state of cracks, subsidence, differential displacements, out of plumb, etc.

It is a data collection device, in the basic version with 8 channels, conceived, designed and built with the aim of providing a reliable and economical instrument, with autonomous power supply, easy to use, ideal where there is the need to install a limited number of electrical transducers.

However, the great versatility of this product makes it possible to connect multiple units together to form a multiple network that allows to house dozens of sensors or the expansion of a single unit through multiplexer modules.

The system can be managed locally (USB / RS485) or even remotely via telephone connection (GSM), via the internet (xDSL, gprs / umts) or wi-fi / radio modules (optional). The control unit can be connected to the network via an RS485 serial bus allowing the interconnection of up to 255 control units on stretches up to 2 km long, furthermore the control unit is able to manage external multiplexers allowing the expandability, at low cost, of the number of channels. The capacity of the internal memory amounts to 1,200,000 readings, while the interval between acquisitions can be set by the user from 1 to 5999 min (100 h) for the single channel. The autonomy of the system with standard batteries is 4/6 months in mild climatic conditions. Power is powered by easily replaceable lithium batteries (non-rechargeable) or by external power supply (12 Volt nominal).

The SMS alarm management menu allows the sending of text messages in the event of thresholds (including diagnostic channels) up to five numbers. Local diagnostics allow monitoring of internal temperature and battery voltage.

The supplied software (SGA) allows the programming of the unit and the transfer of data for subsequent processing, display and direct storage with the aid of a PC or notebook (not included in the supply).

The firmware can be updated on board through the serial line connected to the PC.

Technical features
  • 8 Bit Rabbit 3000 microprocessor operating at 22.1 Mhz
  • Data memory 512 Kbyte for about 1,200,000 readings – Static memory with backup battery
  • Firmware memory 512 Kbyte – Flash memory
  • Real Time Clock (with backup battery for system clock)
  • USB or WiFi serial interface
  • Full Duplex RS232 serial interface (9600 to 115200 bps)
  • RS485 Half Duplex serial interface (9600 to 115200 bps)
  • 16 Bit ADC with 8 single analog inputs protected against overvoltage, power supply selection (2.5 or 12 V with max. Absorption current 100 mA for max. 5 sec) and type of inputs (current / voltage) single endeed:
    • Analog voltage inputs: 0 – 2.5 V or 0 – 5 V
    • Analog current inputs: 4 – 20 mA
    • Input for reading vibrating wire sensors (optional via converter)
  • Programmable gain amplifier from 1 to 128
  • Relay for external alarms activation (1 digital output via bipolar relay n.o. or n.c.)
  • Integrated diagnostics (on board temperature sensor and battery level)
  • Powered by 3.6V lithium battery or with 12 ÷ 24 V power bus
  • Current consumption:
    • Sleep mode: 3 mA
    • Nomal mode: 80 mA
    • Ulteriori informazioni su questo testo di originePer avere ulteriori informazioni sulla traduzione è necessario il testo di origine
Mechanical characteristics

eDAS standard (8 channels):

  • Standard aluminum case with IP65 protection degree
  • Temperature range: -20 to 85 ° C
  • Dimensions: 260 x 160 x 90 mm (L x H x D)
  • Weight: approx. 2500 g

eDAS with multiplexer for channels expansion (16/32 channels):

  • Fiberglass box with IP65 protection degree
  • Temperature range: -20 to 85 ° C
  • Dimensions: 420 x 310 x 160 mm (W x H x D) for the 16/32 CH version
  • Weight: approx. 7500 g
Equipment and manuals
  • SGA software for S.O. Windows Vista / 7/8/10 (32 and 64 bit)
  • eDAS user manual and SGA software user manual
  • USB connection cable
  • Lithium battery
Accessories and Kits

Optional products:

  • Wireless module for eDAS
  • Wireless module for PC
  • Power / alarm box module
  • Multiplexer modules (expandability max. 128 CH)
  • Siren and flashing kit
  • Interface module for ethernet port
  • GSM / GPRS modem
  • 220 V mains power supply
  • 220 V power supply box
  • Solar panel power supply box
Optional software
  • “SGRA” software for managing data acquisition networks (eDAS)
  • Service in SaaS (Software as a Service) in cloud “WAMS”, for the visualization of data from the web
Application
  • Structural monitoring
  • Environmental monitoring
Follow us:

Progetti correlati

B-FANZINE:
SUBSCRIBE AND STAY UPDATED
ON ALL THE NEWS FROM OUR WORLD
AND MORE.